(Complies with BT Specification CW1236)

PACW/cellular PE/PJ /LAP/optional moisture barrier/PE sheathed
External Telephone Cable

Application

The cable is fully filled with petroleum jelly and is designed primarily for use in the Local Main Network. There is an option for spare pair units to be incorporated access into cables of 200 Pairs and above.

Construction

Twisted pairs in 25 Pair Units. The pair range is 50 91¾«Ñ¡ – 2000.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap black polyethylene sheath.

The post External Exchange Side Multipair Telephone Cable appeared first on 91¾«Ñ¡.

(Complies with BT Specifications CW1236 and CW1179)

PACW/cellular PE/PJ /LAP/optional moisture barrier/PE sheathed External Telephone Cable

Application

The cable is fully filled with petroleum jelly and is designed primarily for use in the Local Main Network. There is an option for spare pair units to be incorporated access into cables of 200 Pairs and above.

Construction

Twisted pairs in 25 Pair Units. The pair range is 50 91¾«Ñ¡ – 2000.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, longitudinal aluminium moisture barrier bonded to black polyethylene sheath.

The post External Exchange Side Multipair Screened Telephone Cable appeared first on 91¾«Ñ¡.

(Complies with BT Specifications CW1236/CW1198)

PACW/Cell PE Insulation/PJ Filled/PE Sheathed/Steel Wire Armour/PE Oversheath External Telephone Cable

Application

The cable is designed primarily for direct burial in the outside plant area telecommunications networks. The cable core comprises units of cellular polyethylene insulated twin conductors flooded with petroleum jelly compound with a drop point greater than 80ºC and wrapped with a paper tape. The cable core is covered with a black polyethylene inner sheath. A layer of galvanised steel armour wires is then applied over the sheathed cable and an outer sheath of PE is applied over the armour wires.

Construction

Available as twisted pairs in 25 Pair Units.

Product description

Plain annealed solid copper wire, cellular polyethylene insulation, twisted pairs, petroleum jelly filling, paper core wrap, and black low- density polyethylene sheath. The armour is used as additional protection of telecommunication cables for direct burial.

The jelly-filled cable is armoured with a suitable number of galvanised mild steel wires applied directly over the polyethylene sheath of the cable. The wires comply with BS EN 10257 Part 1 except that the tensile strength is not less than 340 MN/m2 and not greater than 540 MN/ m2. The value of resistivity for the armour is not mandatory. The armoured cable is sheathed overall with PE.

The post External Exchange Side Multipair SWA Armoured Telephone Cable appeared first on 91¾«Ñ¡.